Häner HHG1100 grading bucket for sale by auction
≈ NGN 444,400
Olpe
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€220
≈ $255.70
≈ NGN 392,600
Germany, Olpe
€440
≈ $511.40
≈ NGN 785,300
Germany, Olpe
€750
≈ $871.70
≈ NGN 1,339,000
Germany, Olpe
€450
≈ $523
≈ NGN 803,100
Germany, Olpe
€690
≈ $801.90
≈ NGN 1,231,000
Germany, Olpe
€220
≈ $255.70
≈ NGN 392,600
Germany, Olpe
€360
≈ $418.40
≈ NGN 642,500
Germany, Olpe
Excavator class: 1.2-1.9 ton
Working width: 1000mm
Opening width: 258mm
Depth: 350mm
Recording: MS01 (Symlock)
Weight: 94 kg
Volume (SAE) : 67 L
Base body made of (S355J2+N)
HB400 12x110
cutting edge
Back blade made of HB400 12x110
Taper to the rear 2°
1 cylinder swivel angle 2x45°
Load Holding Valve
Hydraulic connections 10L
Backhoe Bucket HTL130MS-BSYM-01 300 mm
Excavator class: 1.2-1.9 ton
Working width: 300mm
Opening width: 389mm
Depth: 456mm
Recording: MS01
Weight: 31 kg
Volume: (SAE) 33 L
Base body made of (S355J2+N)
HB400 16x110
cutting edge
Taper to the rear 3°
Number of teeth: 2 screwed
Backhoe bucket HTL150MS-BSYM-01 500 mm
Excavator class: 1.2-1.9 ton
Working width: 500mm
Opening width: 389mm
Depth: 455mm
Recording: MS01
Weight: 38 kg
Volume: (SAE) 59 L
Base body made of (S355J2+N)
HB400 16x110
cutting edge
Taper to the rear 3°
Number of teeth: 4 screwed
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 1000mm
Öffunungsweite: 258mm
Tiefe: 350mm
Aufnahme: MS01 (Symlock)
Gewicht: 94 kg
Volumen (SAE) : 67 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 12x110
Rückenschneide aus HB400 12x110
Verjüngung nach hinten 2°
1 Zylinder Schwenkwinkel 2x45°
Lasthalteventil
Hydraulikanschlüsse 10L
Tieflöffel HTL130MS-BSYM-01 300 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 300mm
Öffnungsweite: 389mm
Tiefe: 456mm
Aufnahme: MS01
Gewicht: 31 kg
Volumen: (SAE) 33 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 2 Stück geschraubt
Tieflöffel HTL150MS-BSYM-01 500 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 500mm
Öffnungsweite: 389mm
Tiefe: 455mm
Aufnahme: MS01
Gewicht: 38 kg
Volumen: (SAE) 59 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 4 Stück geschraubt
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 1000mm
Öffunungsweite: 258mm
Tiefe: 350mm
Aufnahme: MS01 (Symlock)
Volumen (SAE): 67 L
Öffnungsweite: 389mm
Volumen: (SAE) 33 L
Anzahl Zähne: 2 Stück geschraubt
Hydr. Grabenräumlöffel HHG1100MS-BSYM-01 1000mm
Grundkörper aus (S355J2+N)
Schneide aus HB400 12x110
Rückenschneide aus HB400 12x110
Verjüngung nach hinten 2°
1 Zylinder Schwenkwinkel 2x45°
Lasthalteventil
Hydraulikanschlüsse 10L
Tieflöffel HTL130MS-BSYM-01 300 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 300mm
Tiefe: 456mm
Aufnahme: MS01
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Tieflöffel HTL150MS-BSYM-01 500 mm
Baggerklasse: 1,2-1,9 Ton
Arbeitsbreite: 500mm
Öffnungsweite: 389mm
Tiefe: 455mm
Aufnahme: MS01
Volumen: (SAE) 59 L
Grundkörper aus (S355J2+N)
Schneide aus HB400 16x110
Verjüngung nach hinten 3°
Anzahl Zähne: 4 Stück geschraubt
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 1000 mm
Ancho de apertura: 258 mm
Profundidad: 350 mm
Grabación: MS01 (Symlock)
Peso: 94 kg
Volumen (SAE) : 67 L
Cuerpo base de (S355J2+N)
Cuchilla HB400 12x110
Hoja trasera de HB400 12x110
Conicidad hacia atrás 2°
1 cilindro ángulo de giro 2x45°
Válvula
de retención de carga
Conexiones hidráulicas 10L
Cuchara de retroexcavadora HTL130MS-BSYM-01 300 mm
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 300 mm
Ancho de apertura: 389 mm
Profundidad: 456 mm
Grabación: MS01
Peso: 31 kg
Volumen: (SAE) 33 L
Cuerpo base de (S355J2+N)
Cuchilla HB400 16x110
Conicidad hacia atrás 3°
Número de dientes: 2 atornillados
Cuchara retroexcavadora HTL150MS-BSYM-01 500 mm
Clase de excavadora: 1,2-1,9 toneladas
Ancho de trabajo: 500 mm
Ancho de apertura: 389 mm
Profundidad: 455 mm
Grabación: MS01
Peso: 38 kg
Volumen: (SAE) 59 L
Cuerpo base de (S355J2+N)
Cuchilla HB400 16x110
Conicidad hacia atrás 3°
Número de dientes: 4 atornillados
Kaivinkoneen luokka: 1,2-1,9 tonnia
Työleveys: 1000mm
Aukon leveys: 258mm
Syvyys: 350 mm
Tallennus: MS01 (Symlock)
Paino: 94 kg
Tilavuus (SAE): 67 L
Pohjarunko (S355J2+N)
HB400 12x110
leikkuureuna
Takaterä HB400 12x110
Kapenee taaksepäin 2°
1 sylinterin kääntökulma 2x45°
Kuorman pidätysventtiili
Hydrauliset liitännät 10L
Kaivurikauha HTL130MS-BSYM-01 300 mm
Kaivinkoneen luokka: 1,2-1,9 tonnia
Työleveys: 300mm
Aukon leveys: 389mm
Syvyys: 456 mm
Tallennus: MS01
Paino: 31 kg
Tilavuus: (SAE) 33 L
Pohjarunko (S355J2+N)
HB400 16x110
leikkuureuna
Kapenee taaksepäin 3°
Hampaiden lukumäärä: 2 ruuvattu
Kaivurikauha HTL150MS-BSYM-01 500 mm
Kaivinkoneen luokka: 1,2-1,9 tonnia
Työleveys: 500mm
Aukon leveys: 389mm
Syvyys: 455 mm
Tallennus: MS01
Paino: 38 kg
Tilavuus: (SAE) 59 L
Pohjarunko (S355J2+N)
HB400 16x110
leikkuureuna
Kapenee taaksepäin 3°
Hampaiden lukumäärä: 4 ruuvattu
Classe d’excavatrice : 1,2-1,9 tonne
Largeur de travail : 1000mm
Largeur d’ouverture : 258 mm
Profondeur : 350 mm
Enregistrement : MS01 (Symlock)
Poids : 94 kg
Volume (SAE) : 67 L
Corps de base en (S355J2+N)
HB400 12x110
tranchant
Lame arrière en HB400 12x110
Cône vers l’arrière 2°
1 cylindre angle de pivotement 2x45°
Vanne
de maintien de charge
Raccords hydrauliques 10L
Godet de pelle rétrocaveuse HTL130MS-BSYM-01 300 mm
Classe d’excavatrice : 1,2-1,9 tonne
Largeur de travail : 300 mm
Largeur d’ouverture : 389 mm
Profondeur : 456 mm
Enregistrement : MS01
Poids : 31 kg
Contenance : (SAE) 33 L
Corps de base en (S355J2+N)
HB400 16x110
tranchant
Cône vers l’arrière 3°
Nombre de dents : 2 vissées
Godet de pelle rétrocaveuse HTL150MS-BSYM-01 500 mm
Classe d’excavatrice : 1,2-1,9 tonne
Largeur de travail : 500 mm
Largeur d’ouverture : 389 mm
Profondeur : 455 mm
Enregistrement : MS01
Poids : 38 kg
Contenance : (SAE) 59 L
Corps de base en (S355J2+N)
HB400 16x110
tranchant
Cône vers l’arrière 3°
Nombre de dents : 4 vissées
Classe escavatore: 1,2-1,9 tonnellate
Larghezza di lavoro: 1000 mm
Larghezza di apertura: 258 mm
Profondità: 350 mm
Registrazione: MS01 (Symlock)
Peso: 94 kg
Volume (SAE) : 67 L
Corpo base in (S355J2+N)
HB400 12x110
tagliente
Lama posteriore in HB400 12x110
Conicità all'indietro di 2°
1 cilindro angolo di rotazione 2x45°
Valvola
di mantenimento del carico
Connessioni idrauliche 10L
Benna per retroescavatore HTL130MS-BSYM-01 300 mm
Classe escavatore: 1,2-1,9 tonnellate
Larghezza di lavoro: 300 mm
Larghezza di apertura: 389 mm
Profondità: 456 mm
Registrazione: MS01
Peso: 31 kg
Volume: (SAE) 33 L
Corpo base in (S355J2+N)
HB400 16x110
tagliente
Conicità all'indietro di 3°
Numero di denti: 2 avvitati
Benna per terna HTL150MS-BSYM-01 500 mm
Classe escavatore: 1,2-1,9 tonnellate
Larghezza di lavoro: 500 mm
Larghezza di apertura: 389 mm
Profondità: 455 mm
Registrazione: MS01
Peso: 38 kg
Volume: (SAE) 59 L
Corpo base in (S355J2+N)
HB400 16x110
tagliente
Conicità all'indietro di 3°
Numero di denti: 4 avvitati
Graafmachine klasse: 1.2-1.9 ton
Werkbreedte: 1000 mm
Breedte opening: 258 mm
Diepte: 350 mm
Opname: MS01 (Symlock)
Gewicht: 94 kg
Inhoud (SAE) : 67 L
Basislichaam gemaakt van (S355J2+N)
HB400 12x110
snijkant
Achterlemmet van HB400 12x110
Taps toelopend naar achteren 2°
1 cilinder zwenkhoek 2x45°
Klep voor het vasthouden van
de belasting
Hydraulische aansluitingen 10L
Dieplepelbak HTL130MS-BSYM-01 300 mm
Graafmachine klasse: 1.2-1.9 ton
Werkbreedte: 300 mm
Breedte opening: 389 mm
Diepte: 456 mm
Opname: MS01
Gewicht: 31 kg
Inhoud: (SAE) 33 L
Basislichaam gemaakt van (S355J2+N)
HB400 16x110
snijkant
Taps toelopend naar achteren 3°
Aantal tanden: 2 geschroefd
Dieplepelbak HTL150MS-BSYM-01 500 mm
Graafmachine klasse: 1.2-1.9 ton
Werkbreedte: 500 mm
Breedte opening: 389 mm
Diepte: 455 mm
Opname: MS01
Gewicht: 38 kg
Inhoud: (SAE) 59 L
Basislichaam gemaakt van (S355J2+N)
HB400 16x110
snijkant
Taps toelopend naar achteren 3°
Aantal tanden: 4 geschroefd
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 1000mm
Szerokość otworu: 258mm
Głębokość: 350mm
Nagrywanie: MS01 (Symlock)
Waga: 94 kg
Pojemność (SAE) : 67 L
Korpus podstawy wykonany z (S355J2+N)
HB400 12x110
krawędź tnąca
Tylne ostrze wykonane z HB400 12x110
Zwężenie do tyłu 2°
Kąt obrotu 1 siłownika 2x45°
Zawór
utrzymujący obciążenie
Przyłącza hydrauliczne 10L
Łyżka podsiębierna HTL130MS-BSYM-01 300 mm
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 300mm
Szerokość otworu: 389mm
Głębokość: 456mm
Nagrywanie: MS01
Waga: 31 kg
Pojemność: (SAE) 33 L
Korpus podstawy wykonany z (S355J2+N)
HB400 16x110
Krawędź tnąca
Zwężenie do tyłu pod kątem 3°
Ilość zębów: 2 przykręcane
Łyżka podsiębierna HTL150MS-BSYM-01 500 mm
Klasa koparki: 1,2-1,9 tony
Szerokość robocza: 500mm
Szerokość otworu: 389mm
Głębokość: 455mm
Nagrywanie: MS01
Waga: 38 kg
Pojemność: (SAE) 59 L
Korpus podstawy wykonany z (S355J2+N)
HB400 16x110
Krawędź tnąca
Zwężenie do tyłu pod kątem 3°
Ilość zębów: 4 przykręcane
Clasa excavatorului: 1,2-1,9 tone
Lățime de lucru: 1000mm
Lățime de deschidere: 258mm
Adâncime: 350mm
Înregistrare: MS01 (Symlock)
Greutate: 94 kg
Volum (SAE) : 67 L
Corp de bază din (S355J2+N)
HB400 12x110
muchie de tăiere
Lama din spate din HB400 12x110
Conicitate în spate 2°
1 cilindru unghi de rotire 2x45°
Supapă
de menținere a sarcinii
Conexiuni hidraulice 10L
Cupă buldoexcavator HTL130MS-BSYM-01 300 mm
Clasa excavatorului: 1,2-1,9 tone
Lățime de lucru: 300mm
Lățime de deschidere: 389mm
Adâncime: 456 mm
Înregistrare: MS01
Greutate: 31 kg
Volum: (SAE) 33 L
Corp de bază din (S355J2+N)
HB400 16x110
muchie de tăiere
Conicitate în spate 3°
Număr de dinți: 2 înșurubați
Cupă buldoexcavator HTL150MS-BSYM-01 500 mm
Clasa excavatorului: 1,2-1,9 tone
Lățime de lucru: 500mm
Lățime de deschidere: 389mm
Adâncime: 455 mm
Înregistrare: MS01
Greutate: 38 kg
Volum: (SAE) 59 L
Corp de bază din (S355J2+N)
HB400 16x110
muchie de tăiere
Conicitate în spate 3°
Număr de dinți: 4 înșurubați
Grävmaskinsklass: 1,2-1,9 ton
Arbetsbredd: 1000mm
Öppningsbredd: 258mm
Djup: 350 mm
Inspelning: MS01 (Symlock)
Vikt: 94 kg
Volym (SAE) : 67 L
Bas gjord av (S355J2+N)
HB400 12x110
skäregg
Ryggblad av HB400 12x110
Avsmalnande bakåt 2°
1 cylinders svängvinkel 2x45°
Ventil för lasthållning
Hydrauliska anslutningar 10L
Grävskopa HTL130MS-BSYM-01 300 mm
Grävmaskinsklass: 1,2-1,9 ton
Arbetsbredd: 300mm
Öppningsbredd: 389mm
Djup: 456 mm
Inspelning: MS01
Vikt: 31 kg
Volym: (SAE) 33 L
Bas gjord av (S355J2+N)
HB400 16x110
skäregg
Avsmalnande bakåt 3°
Antal tänder: 2 skruvade
Grävskopa HTL150MS-BSYM-01 500 mm
Grävmaskinsklass: 1,2-1,9 ton
Arbetsbredd: 500mm
Öppningsbredd: 389mm
Djup: 455 mm
Inspelning: MS01
Vikt: 38 kg
Volym: (SAE) 59 L
Bas gjord av (S355J2+N)
HB400 16x110
skäregg
Avsmalnande bakåt 3°
Antal tänder: 4 st skruvade