Fehlmann AT125 CNC machining centre for sale by auction
≈ NGN 10,520,000
Weilheim Teck
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€4,500
≈ $5,264
≈ NGN 8,025,000
Germany, Heidelberg
€6,900
≈ $8,071
≈ NGN 12,300,000
Germany, Weilheim Teck
€1,900
≈ $2,222
≈ NGN 3,388,000
Germany, Burgoberbach
€3,600
≈ $4,211
≈ NGN 6,420,000
Germany, Steinen
€7,900
≈ $9,241
≈ NGN 14,090,000
Germany, Velen-Ramsdorf
€19,000
≈ $22,220
≈ NGN 33,880,000
Germany, Mietingen
€8,200
≈ $9,592
≈ NGN 14,620,000
Germany, Falkenberg
€250
≈ $292.40
≈ NGN 445,800
Germany, Schwäbisch Gmünd
€5,900
≈ $6,901
≈ NGN 10,520,000
Germany, Boxberg
€3,900
≈ $4,562
≈ NGN 6,955,000
Germany, Burgoberbach
€4,900
≈ $5,732
≈ NGN 8,738,000
Germany, Villingen-Schwenningen
€250
≈ $292.40
≈ NGN 445,800
Germany, Schwäbisch Gmünd
€4,000
≈ $4,679
≈ NGN 7,133,000
50 Hz
Germany, Steinen
€1,000
≈ $1,170
≈ NGN 1,783,000
Germany, Schwäbisch Gmünd
€500
≈ $584.80
≈ NGN 891,700
Germany, Schwäbisch Gmünd
€4,000
≈ $4,679
≈ NGN 7,133,000
Germany, Strullendorf
€6,500
≈ $7,603
≈ NGN 11,590,000
Germany, Rüsselsheim
€3,500
≈ $4,094
≈ NGN 6,242,000
Germany, Villingen-Schwenningen
€1,000
≈ $1,170
≈ NGN 1,783,000
50 Hz
Germany, Vlotho
€1,800
≈ $2,105
≈ NGN 3,210,000
Germany, Rüsselsheim
Operating voltage: 400 V
Frequency: 50 Hz
Rated current: 32 A
Control: HEIDENHAIN
Travel:
X: 700 mm
Y: 315 mm
Z: 180 mm
W: 495 mm
Feed speed:
In X and Y axis: 9000 mm/min
In Z and W axis: 1 - 4000 mm/min
Feed force:
In X and Y axis: 4800 N
In Z-axis: 10500 N
Tool holder: SK 30
Speed range: 50 – 9200 rpm
Table dimensions: 1230 x 410 mm
With 7 grooves
Groove width: 12 mm
Groove spacing: 50 mm
Permissible table load: 250 kg
Distance from floor to coordinate table: 1010 mm
Distance coordinate table to spindle nose: 0 – 125 – 620 mm
Horizontal projection: 370 mm
With a 32-fold tool changer
Max. tool length: 260 mm
Max. tool diameter without free spaces: 63 mm
Incl. dividing head (4th axis) from the manufacturer FEHLMANN
Type: AT125 CNC
Incl. approx. 126 SK 30 tool holders and documentation
Betriebsspannung: 400 V
Frequenz: 50 Hz
Nennstrom: 32 A
Steuerung: HEIDENHAIN
Verfahrwege:
X: 700 mm
Y: 315 mm
Z: 180 mm
W: 495 mm
Vorschubgeschwindigkeit:
In X- und Y-Achse: 9000 mm/min
In Z- und W-Achse: 1 - 4000 mm/min
Vorschubkraft:
In X- und Y-Achse: 4800 N
In Z-Achse: 10500 N
Werkzeugaufnahme: SK 30
Drehzahlbereich: 50 – 9200 U/min
Tischabmessungen: 1230 x 410 mm
Mit 7 Nuten
Nutenbreite: 12 mm
Nutenabstand: 50 mm
Zulässige Tischbelastung: 250 kg
Abstand Boden bis Koordinatentisch: 1010 mm
Abstand Koordinatentisch bis Spindelnase: 0 – 125 – 620 mm
Horizontale Ausladung: 370 mm
Mit einem 32-fahcen Werkzeugwechsler
Max. Werkzeuglänge: 260 mm
Max. Werkzeugdurchmesser ohne Freiplätze: 63 mm
Inkl. Teilapparat (4. Achse) des Herstellers FEHLMANN
Typ: AT125 CNC
Inkl. ca. 126 SK 30 Werkzeugaufnahmen sowie Dokumentationen
Maschinennummer: 15105602
Betriebsspannung: 400 V
Frequenz: 50 Hz
Nennstrom: 32 A
Steuerung: HEIDENHAIN
X: 700 mm
Y: 315 mm
Z: 180 mm
W: 495 mm
In X- und Y-Achse: 9000 mm/min
In Z- und W-Achse: 1 - 4000 mm/min
In Z-Achse: 10500 N
Werkzeugaufnahme: SK 30
Drehzahlbereich: 50 – 9200 U/min
Tischabmessungen: 1230 x 410 mm
Nutenbreite: 12 mm
Nutenabstand: 50 mm
Zulässige Tischbelastung: 250 kg
Abstand Boden bis Koordinatentisch: 1010 mm
Abstand Koordinatentisch bis Spindelnase: 0 – 125 – 620 mm
Horizontale Ausladung: 370 mm
Max. Werkzeuglänge: 260 mm
Max. Werkzeugdurchmesser ohne Freiplätze: 63 mm
Länge: 3500
Höhe: 2200
Breite: 2400
Verfahrwege
Vorschubgeschwindigkeit
Vorschubkraft
In X- und Y-Achse: 4800 N
Mit 7 Nuten
Mit einem 32-fahcen Werkzeugwechsler
Inkl. Teilapparat (4. Achse) des Herstellers FEHLMANN
Inkl. ca. 126 SK 30 Werkzeugaufnahmen sowie Dokumentationen
Tension de fonctionnement : 400 V
Fréquence : 50 Hz
Courant nominal : 32 A
Contrôle : HEIDENHAIN
Voyager:
X : 700 mm
Y : 315 mm
Z : 180 millimètre
L : 495 mm
Vitesse d’avance :
Dans les axes X et Y : 9000 mm/min
Dans les axes Z et W : 1 - 4000 mm/min
Force d’avance :
Dans les axes X et Y : 4800 N
Dans l’axe Z : 10500 N
Porte-outil : SK 30
Plage de vitesse : 50 – 9200 tr/min
Dimensions de la table : 1230 x 410 mm
Avec 7 rainures
Largeur de la rainure : 12 mm
Espacement des rainures : 50 mm
Charge admissible sur la table : 250 kg
Distance entre le sol et la table de coordonnées : 1010 mm
Tableau de coordonnées de distance au nez de broche : 0 – 125 – 620 mm
Projection horizontale : 370 mm
Avec changeur
d’outils 32 fois
Longueur max. de l’outil : 260 mm
Diamètre max. de l’outil sans espaces libres : 63 mm
Avec tête de division (4ème axe) du fabricant FEHLMANN
Type : AT125 CNC
Avec environ 126 porte-outils SK 30 et documentation
Tensione di esercizio: 400 V
Frequenza: 50 Hz
Corrente nominale: 32 A
Controllo: HEIDENHAIN
Viaggio:
X: 700 mm
Y: 315 mm
Z: 180 mm
L: 495 mm
Velocità di avanzamento:
Negli assi X e Y: 9000 mm/min
Negli assi Z e W: 1 - 4000 mm/min
Forza di avanzamento:
Negli assi X e Y: 4800 N
Nell'asse Z: 10500 N
Portautensili: SK 30
Gamma di velocità: 50 – 9200 giri/min
Dimensioni del tavolo: 1230 x 410 mm
Con 7 scanalature
Larghezza della scanalatura: 12 mm
Distanza tra le scanalature: 50 mm
Carico ammissibile della tavola: 250 kg
Distanza dal pavimento alla tavola delle coordinate: 1010 mm
Distanza dalla tavola delle coordinate al naso del mandrino: 0 – 125 – 620 mm
Proiezione orizzontale: 370 mm
Con un cambio
utensile a 32 posizioni
Lunghezza massima dell'utensile: 260 mm
Diametro massimo dell'utensile senza spazi liberi: 63 mm
Incl. testa divisoria (4° asse) del produttore FEHLMANN
Tipo: AT125 CNC
Inclusi circa 126 portautensili SK 30 e documentazione
Bedrijfsspanning: 400 V
Frequentie: 50 Hz
Nominale stroom: 32 A
Besturing: HEIDENHAIN
Reizen:
Breedte: 700 mm
Y: 315 mm
Z: 180 mm
B: 495 mm
Aanvoersnelheid:
In X- en Y-as: 9000 mm/min
In Z- en W-as: 1 - 4000 mm/min
Voedingskracht:
In X- en Y-as: 4800 N
In Z-as: 10500 N
Gereedschapshouder: SK 30
Toerentalbereik: 50 – 9200 tpm
Afmetingen tafel: 1230 x 410 mm
Met 7 groeven
Groefbreedte: 12 mm
Groefafstand: 50 mm
Toegestane tafelbelasting: 250 kg
Afstand van vloer tot coördinatentafel: 1010 mm
Afstand coördinatentafel tot spindelneus: 0 – 125 – 620 mm
Horizontale projectie: 370 mm
Met een 32-voudige gereedschapswisselaar
Max. gereedschapslengte: 260 mm
Max. gereedschapsdiameter zonder vrije ruimtes: 63 mm
Incl. verdeelkop (4e as) van de fabrikant FEHLMANN
Type: AT125 CNC
Incl. ca. 126 SK 30 gereedschapshouders en documentatie