Maho MH1000C metal milling machine for sale by auction
≈ $1,653
Weilheim Teck
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,200
≈ NGN 2,119,000
≈ $1,417
50 Hz
Germany, Schöneck
€1,200
≈ NGN 2,119,000
≈ $1,417
Germany, Schöneck
€750
≈ NGN 1,324,000
≈ $885.50
Germany, Schöneck
€990
≈ NGN 1,748,000
≈ $1,169
50 Hz
Germany, Schöneck
€950
≈ NGN 1,678,000
≈ $1,122
50 Hz
Germany, Schöneck
€1,300
≈ NGN 2,296,000
≈ $1,535
Germany, Hallenberg
€1,200
≈ NGN 2,119,000
≈ $1,417
Germany, Villingen-Schwenningen
€7,900
≈ NGN 13,950,000
≈ $9,328
50 Hz
Germany, Weilheim Teck
€360
≈ NGN 635,700
≈ $425.10
Germany, Monheim
€19,900
≈ NGN 35,140,000
≈ $23,500
60 Hz
Germany, Boxberg
€12,500
≈ NGN 22,070,000
≈ $14,760
Germany, Chemnitz
€500
≈ NGN 883,000
≈ $590.40
Germany, Haiger
€500
≈ NGN 883,000
≈ $590.40
Germany, Herzberg Am Harz
€2,500
≈ NGN 4,415,000
≈ $2,952
Germany, Herzberg Am Harz
€250
≈ NGN 441,500
≈ $295.20
Germany, Herzberg Am Harz
€45,000
≈ NGN 79,470,000
≈ $53,130
Germany, Chemnitz
€15,000
≈ NGN 26,490,000
≈ $17,710
Germany, Chemnitz
€3,500
≈ NGN 6,181,000
≈ $4,132
Germany, Huisheim
€7,000
≈ NGN 12,360,000
≈ $8,265
50 Hz
Germany, Linden
€250
≈ NGN 441,500
≈ $295.20
Germany, Herzberg Am Harz
Specifications:
Adjustment of the cross support in the horizontal longitudinal axis (X-axis): 1000 mm
In the vertical axis (Y-axis): 500 mm
Adjustment of the headstock in the horizontal transverse axis (Z-axis): 700 mm
Tool holder: ISO 50
Quill stroke of the vertical working spindle: 100 mm
Work spindle speeds directly programmable: 20 - 3200 rpm
Feeds directly programmable X-, Y- and Z-axis: 1 - 3000 mm/min
Rapid traverse X and Z axis: 6 m/min
Y-axis: 5 m/min
Number of magazine slots in the tool changer: 20
Table load: max. 1000 kg
For more technical data see pictures
With technical documentation as shown
in the pictures
Important note: Transport is carried out on trucks up to 3000 mm wide
Technische Daten:
Verstellung des Kreuzsupports in der horizontalen Längsachse (X-Achse): 1000 mm
In der vertikalen Achse (Y-Achse): 500 mm
Verstellung des Spindelstocks in der horizontalen Querachse (Z-Achse): 700 mm
Werkzeugaufnahme: ISO 50
Pinolenhub der vertikalen Arbeitsspindel: 100 mm
Arbeitsspindeldrehzahlen direkt programmierbar: 20 - 3200 U/min
Vorschübe direkt programmierbar X-, Y- und Z-Achse: 1 - 3000 mm/min
Eilgang X- und Z-Achse: 6 m/min
Y-Achse: 5 m/min
Anzahl der Magazinplätze im Werkzeugwechsler: 20
Tischbelastung: max. 1000 kg
Für weitere technische Daten siehe Bilder
Mit technischer Dokumentation wie auf den Bildern zu sehen
Wichtiger Hinweis: Transport erfolgt auf LKW bis 3000 mm Breite
Verstellung des Kreuzsupports in der horizontalen Längsachse (X-Achse): 1000 mm
In der vertikalen Achse (Y-Achse): 500 mm
Verstellung des Spindelstocks in der horizontalen Querachse (Z-Achse): 700 mm
Werkzeugaufnahme: ISO 50
Pinolenhub der vertikalen Arbeitsspindel: 100 mm
Arbeitsspindeldrehzahlen direkt programmierbar: 20 - 3200 U/min
Vorschübe direkt programmierbar X-, Y- und Z-Achse: 1 - 3000 mm/min
Eilgang X- und Z-Achse: 6 m/min
Y-Achse: 5 m/min
Anzahl der Magazinplätze im Werkzeugwechsler: 20
Tischbelastung: max. 1000 kg
Wichtiger Hinweis: Transport erfolgt auf LKW bis 3000 mm Breite
Technische Daten
Für weitere technische Daten siehe Bilder
Mit technischer Dokumentation wie auf den Bildern zu sehen
Spécifications:
Réglage du support transversal dans l’axe longitudinal horizontal (axe X) : 1000 mm
Dans l’axe vertical (axe Y) : 500 mm
Réglage de la poupée dans l’axe transversal horizontal (axe Z) : 700 mm
Porte-outil : ISO 50
Course de la piquante de la broche de travail verticale : 100 mm
Vitesses de la broche de travail directement programmables : 20 - 3200 tr/min
Alimentations directement programmables sur les axes X, Y et Z : 1 - 3000 mm/min
Rotation rapide des axes X et Z : 6 m/min
Axe Y : 5 m/min
Nombre de fentes de magasin dans le changeur d’outils : 20
Charge de la table : max. 1000 kg
Pour plus de données techniques, voir les photos
Avec la documentation technique comme
indiqué sur les photos
Remarque importante : Le transport s’effectue sur des camions d’une largeur maximale de 3000 mm
Indicazioni:
Regolazione del supporto trasversale sull'asse longitudinale orizzontale (asse X): 1000 mm
Nell'asse verticale (asse Y): 500 mm
Regolazione della paletta sull'asse trasversale orizzontale (asse Z): 700 mm
Portautensili: ISO 50
Corsa del cannotto del mandrino di lavoro verticale: 100 mm
Velocità del mandrino di lavoro programmabile direttamente: 20 - 3200 giri/min
Avanzamenti direttamente programmabili sugli assi X, Y e Z: 1 - 3000 mm/min
Traslazione rapida assi X e Z: 6 m/min
Asse Y: 5 m/min
Numero di fessure del caricatore nel cambio utensile: 20
Carico tavola: max. 1000 kg
Per ulteriori dati tecnici vedere le immagini
Con documentazione tecnica come da
foto
Nota importante: il trasporto viene effettuato su camion larghi fino a 3000 mm
Specificaties:
Aanpassing van de dwarssteun in de horizontale lengteas (X-as): 1000 mm
In de verticale as (Y-as): 500 mm
Aanpassing van de kop in de horizontale dwarsas (Z-as): 700 mm
Gereedschapshouder: ISO 50
Quill-slag van de verticaal werkende spindel: 100 mm
Werkspindelsnelheden direct programmeerbaar: 20 - 3200 rpm
Voedt direct programmeerbare X-, Y- en Z-as: 1 - 3000 mm/min
Snelle verplaatsing X- en Z-as: 6 m/min
Y-as: 5 m/min
Aantal magazijnsleuven in de gereedschapswisselaar: 20
Tafelbelasting: max. 1000 kg
Voor meer technische gegevens zie foto's
Met technische documentatie zoals
op de foto's te zien is
Belangrijke opmerking: Het transport vindt plaats op vrachtwagens tot 3000 mm breed