Abrazivnye diski 300512 abrasive material

PDF
Abrazivnye diski 300512 abrasive material - Machineryline
1/1
PDF
€0.71
UZS 10,000
≈ $0.78
Contact the seller
Location: Uzbekistan Tashkent10555 km from you
Placed on: more than 1 month
Machineryline ID: FL43244
Additional services

More details — Абразивные диски 300512 abrasive material

CS-8РозовыйУпругое колесо сочень мягким истиранием, рассчитано на работу при нагрузках от 250 до500 грамм.Не превышать 500г нагрузкиCS-10FКоричневыйОбладает болеемягким абразивным действием, чем CS-10. В основном используется дляпрозрачных материалов для оценки потускнения.Не превышать 500г нагрузкиCS-10ЗеленыйМягкое – среднееабразивное действие, как при нормальной обработке, очистке илиполировке. Широко используемый круг для покрытий, пластика, текстиля,кожи и продуктов из бумаги. CS-10РЗеленыйПредназначен дляиспытания бумаги и продуктов из бумаги. CS-10WБелыйТакой же, как иCS-10, но белого цвета. Отсутствует перенос цветных частичек абразива наобразец. CS-17Темно-зеленыйОказывает болеегрубое абразивное действие, чем CS-10. Применяется для испытаниякерамики, пластика и анодированного алюминия. Н-10СерыйПредназначен дляиспытания стали и других железных сплавов. Н-18СерыйСредние абразивныесвойства. Рекомендован для кожи, резины, тканых изделий, материалов споверхностным покрытием, гибких пластиковых листов и других эластичныхматериалов. Н-22Серо-зеленыйВыполняет грубуюшлифовку. Испытываемые материалы: резина, линолеум, кожа, материалы свысоким ворсом и бетон. Н-38Желто-коричневыйОченьтонкодисперсный диск. Основное применение – испытание тканых материалови деликатных тканей.Не превышать 500г нагрузки, перешлифовка прибором с алмазным карандашомCS-5БелыйДиск из плотногошерстяного фетра. Основное применение – испытание тканых материалов дляоценки трения одного волокнистого материала о другой.Не превышать 500г нагрузкиS-32(CS-0)ЧерныйГладкий резиновыйкруг без абразивного материала. Обладает очень мягким абразивнымдействием, для испытаний в мокром состоянии и для установки S-33 илиS-42 клейкой шлифовальной шкурки. S-35 Круг из карбидавольфрама, состоящий из острого 1 мм шага зубьев под углом 45°, косыезубья режут по периметру. Круг оказывает очень сильное ржущее и рвущеедействие. Используется только на эластичных материалах.Очисткаповерхности растворителем и жесткой щеткойS-39 Полоса кожи,прикрепляемая к внешней стороне латунного сердечника. Используетсявместе с Абразивным фидером.Минимальныйполезный диаметр – 46 мм (1 13/16 дюйма)S-33 Полоса шлифовальнойшкурки, используемая с кругом S-32 (CS-0).12,7 мм x 160 мм, 360 FEPA, с закрытыми зернами абразива, с PSA. S-42 Полоса шлифовальнойшкурки, используемая с кругом S-32 (CS-0).12,7 мм x 160 мм, 360 ANSI-CAMI, с открытыми зернами абразива, с PSA.  
Important
This offer is for guidance only. Please request more precise information from the seller.
Purchase tips
Safety tips
Seller Verification

If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.

Price Check

Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.

Do not buy products which price is too different from the average price for similar equipment.

Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.

Doubtful prepayment

The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.

Varieties of this fraud may include:
  • Transfer of prepayment to the card
  • Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
  • Transfer to the “Trustee” account
  • Such a request should be alarming, most likely you are communicating with a fraudster.
  • Transfer to a company account with a similar name
  • Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
  • Substitution of own details in the invoice of a real company
  • Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Found a fraud?
Let us know
Safety tips
PDF
Selling machinery or vehicles?
You can do it with us!
Similar ads
Ручной буровой комплект геолога:1005167 drill bit
1
€1,108 UZS 15,700,000 ≈ $1,225
Uzbekistan, Tashkent
Contact the seller
SK50 milling cutter SK50 milling cutter SK50 milling cutter
3
Price on request
Germany, Dorsten - Hervest
Contact the seller
Price on request
Germany, Dorsten - Hervest
Contact the seller
KELCH MAS BT 50 milling cutter KELCH MAS BT 50 milling cutter
2
Price on request
Germany, Cologne
Contact the seller
Price on request
Germany, Dorsten - Hervest
Contact the seller
Price on request
Belgium, Deinze
Contact the seller
DIN 2080 13 Cônes porte-outils en lot ou à l'unité milling cutter
1
Price on request
France, Saint-Chamond
Contact the seller
Price on request
Germany, Salzgitter-Bad
Contact the seller
€5,703 PLN 24,310 ≈ $6,306
2024
Poland, Gorzów Wielkopolski
Contact the seller
Price on request
Germany, Freiberg am Neckar
Contact the seller
Price on request
Germany, Freiberg am Neckar
Contact the seller