New NKO Machines UZ15 Rapid chamfering machine
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Cologne
Germany, Heidenheim
Germany, Bühl-Weitenung
Germany, Bruchsal-Büchenau
Germany, Salzgitter-Bad
workpiece length -- mm
work piece width 15 mm
range of angles 15-50 °
plate thickness 6-40 mm
total power requirement 1,5 kW
Feed speed 3,5 m/min.
dimensions 530 x 395 x 860 mm
The UZ15 RAPID machine is one of the fastest beveling machines with
automatic feed on the market. It is not only suitable for
workshops, but also for assembly work. It has a stepless
Bevel angle adjustment system. Also, the machine with an automatic
feed equipped. Working with the UZ15 Rapid is therefore very convenient.
- For conventional steel (up to a strength of 600 MPA/
87022PSI), brass, copper and aluminum materials
- For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm
- Application range of sheet thickness 6 - 40 mm
- The bevel angle can be easily adjusted from 15 to 50 continuously without
that a part needs to be replaced
- Double-sided bevel (X, K) without material handling
- Easy connection to the 3D manipulator for easier operation and
handling
- Silent working
- Equipped with automatic feeder
- Stationary or mobile use
- The machine works with large workpieces without any support
a speed of 3.5m/min
- Smaller workpieces are placed directly in the machine
- Reduced price when purchasing UZ15 RAPID together with the 3D manipulator
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Werkstücklänge -- mm
Werkstückbreite 15 mm
Winkelbereich 15-50 °
Blechstärke 6-40 mm
Gesamtleistungsbedarf 1,5 kW
Vorschubgeschwindigkeit 3,5 m/min.
Abmessungen 530 x 395 x 860 mm
Die Maschine UZ15 RAPID ist eine der schnellsten Anfasmaschinen mit
automatischem Vorschub auf dem Markt. Sie eignet sich nicht nur für
Werkstätten, sondern auch für Montageeinsätze. Sie verfügt über ein stufenloses
Fasenwinkel-Einstellsystem. Ausserdem ist die Maschine mit einem automatischen
Vorschub ausgestattet. Das Arbeiten mit UZ15 Rapid ist daher sehr komfortabel.
- Für konventionellen Stahl (bis zu einer Festigkeit von 600 MPA/
87022PSI),Messing, Kupfer und Aluminiummaterialien
- Zum Anfasen von Werkstückenmit den Mindestmassen von 70 x 150 x 6 mm
- Einsatzbereich der Blechstärke 6 – 40 mm
- Der Fasenwinkel lässt sich leicht von 15 bis 50 stufenlos einstellen, ohne
dass ein Teil ausgetauscht werden muss
- Doppelseitige Fase (X, K) ohne Materialhandhabung
- Einfacher Anschluss an den 3D-Manipulator für einfachere Bedienung und
Handhabung
- Geräuschloses Arbeiten
- Ausgestattet mit automatischem Einzug
- Stationärer oder mobiler Einsatz
- Die Maschine arbeitet mit grossen Werkstücken ohne jede Unterstützung mit
einer Geschwindigkeit vom 3,5m/min
- Kleinere Werkstücke werden direkt in die Maschine eingelegt
- Ermässigter Preis beim Kauf von UZ15 RAPID zusammen mit dem 3D-Manipulator