Zeiss Contura 7/10/6 RDS coordinate measuring machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Dusseldorf
Germany, Pullach
Germany, Location:berlin
Germany, Kaiserslautern
Additional information
Maximum workpiece size: approx. 1344 x 910 x 716 mm
Maximum workpiece weight: 730 kg
Table height: 850 mm
Equipped with vibration damping system
Sensor System:
Articulating head: tilt ±180°, rotation increments 2.5°
Scanning speed: up to 150 points/second
Max. stylus length: 150 mm
Max. stylus weight: 15 g
Min. stylus tip diameter: 0.3 mm
Accuracy (per ISO 10360 standards):
Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C)
Scanning error (THP): 2.7 µm
Form measurement error (RONt): 1.7 µm
Repeatability (R₀): 1.2 µm
Controller: ZEISS C99L
Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS
Control mode: Motorized / CNC
Interface: Ethernet, USB
Performance:
Drive system: Motorized CNC
Travel speed (axes): 0–70 mm/s
Max. vector speed: 465 mm/s
Max. acceleration: 1.85 m/s²
Scanning speed: up to 125 mm/s
Utilities:
Power supply: 100–240V AC (±10%), 50–60 Hz
Max. power consumption: 800 VA
Typical power usage: 200 W
Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4)
Air consumption: max. 120 Nl/min
Environmental Conditions:
Operating temperature: 18°C–22°C
Relative humidity: 30–60% (non-condensing)
Compliance & Certifications:
Conforms to EC Machine Directive 2006/42/EC
EMC Directive 2014/30/EU
Quality management: ISO 9001:2008
Environmental management: ISO 14001:2004
Accredited ISO / IEC 17025:2005
application type: Measuring
Location: Romania
machine type: Coordinate Measuring Machine (CMM)
Machine Depth: 1975 mm