Haitian ZHAFIR ZERES450/1700 injection moulding machine

This ZHAFIR ZERES450/1700 Haitian Injection Moulding Machine was manufactured in the year: 2018, serial number application type injection moulding, machine type: injection moulding machines;
Zhafir Zeres 450/1700

Designed to optimize energy consumption to the maximum, ZHAFIR ZERES hybrid injection machines are distinguished by the substantially reduced electricity consumption by 20% to 80%.
Configure:
Injection unit - EUROMAP type classification: 1700
Auger diameter: Ø 65, L/D 20
Control panel: Sigmatek
Zhafir Zeres 450
Features of the machine:
CLOSING UNIT:
Closing unit actuation with SNK components (Made in Japan)
Automatic lubrication system (Made in Japan - LUBE CORPORATION)
Closing system with 5-point articulation.
Adjustment of pressure and opening/closing speed in 6 steps Adjustment of opening/closing force in max
steps (min. 3).
Double safety for mold protection
Programmable joint unlocking function
Mechanical and electrical safety according to CE standards
Limiting the speed and pressure of closing/opening and throwing in mold mounting mode
Adjustable movable plate support skates
Automatic mold height adjustment with stop, upon reaching the minimum/maximum stroke
Compression injection cycle
Automatic mould height adjustmentThe mobile platform is provided with holes for throwers, and the standard Euromap type (exception, ZE 40 t.) is used.
Hydraulic central thrower system with quick coupling.
Adjustment of pressure and throwing speed in 3 steps
Central thrower time adjustment
Double-stroke hydraulic thrower.
Parallel opening/throwing movements.
"T" channels and threaded holes EUROMAP type
Possibility of a device for the evacuation of parts and/or the positioning of an external unit for the actuation of hydraulic cores (up to 300 tons).
Manual operator door opening. Optionally, electric.
INJECTION UNIT: Universal screw profile.
Bimetallic cylinder (up to Euromap 1700 injection unit).
Nitrided slug (up to Euromap 1700 injection unit).
Standard nozzle
Nozzle protection grid with limiter
Folding injection unit for service access.
Hydraulic movement of the injection unit with pressure and speed setting
Ceramic resistors (230 V) with "K" type thermocouples and maximum settable temperature of 400° C. Funnel support guide, with bearings
The possibility of setting the cylinder temperature with the PID system and in percentage
Selectable purging cycle
Injection adjustment depends on stroke, speed, time and pressure.
Injection speed adjustment in 6 steps
Post-pressure adjustment in 4 steps.
Counter-pressure adjustment in 3 steps.
Dosing adjustment in 3 steps
Decompression adjustment in 3 steps
Setting the switching phase in 4 modes (V/P)
The possibility of programming the injection unit with a target departure
Dosing permission at the minimum temperature reached
Automatic cylinder temperature optimization
Closed-loop adjustment of the temperature of the feeding area.
Closed-loop regulation of the heat exchanger temperature.
Options included in the standard equipment Zhafir Zeres 450:
N. 1 hydraulic core drive up to 150 tons. (N. 2 from 190 to 550).
Optional with check valve
Anti-vibration supports
Hardware/software interface for the air valve
HERZOG pneumatic nozzle hardware/software interface.
N. 8 clamps for fixing molds
N. 3 sockets 380V/16A
Mold cooling distributor: 6I/6E (up to 150 tons) 8I/8E (190 tons and 550 tons) Spare parts box equipped with:
- n.1 extended nozzle
- n.1 non-return valve
- n. 1 nozzle thermocouple
- n. 1 cylinder thermocouple
- n. 1 nozzle resistance
- n. 1 cylinder ceramic resistance (1 per area)
- n. 1 set of keys
- n.1 "cartridge" vaseline LUBE
HARDWARE/SOFTWARE
Electric motor cooling: with air.
Electric panel cooling: with air
- EUROMAP 67 robot interface (or EUROMAP 18 on P.F.)
Technical specifications:
CLOSING UNIT
Closing force - 4500 kN
Opening stroke - 800 mm
Minimum mold height - 350 mm
Maximum mold height - 800 mm
Max distance between plates - 1600 mm
Distance between columns 870 x 870 mm
Minimum die size (L x W) 570 x 570 mm
Thrower stroke 180 mm
Thrower force 98.0 kN (10.0 ton.)
Plates sizes 1270 x 1270 mm
INJECTION UNIT
Screw diameter: - 65 mm
Auger L/D ratio: 20
Theoretical injection capacity: - 929 cm3
Effective injection capacity (PS): 845 g
Injection speed (PS): 160 mm/s
Injection speed (PS): 483 g/s
Injection pressure: 180 MPa (1800 bar)
Maintenance pressure: 160 MPa (1600 bar)
Maximum screw rotation speed: 250 rpm
Plasticizing capacity (PS): 70,0 g/s
Nozzle pressing force: 54,0 kN (5,5 tf)
Heating power: 32 kW
GENERAL DATA
Nominal power: 72,0 kW (129 A)
Feeding hopper capacity: 50 l
Machine dimensions (l x w x h): 8,67m x 2,25 m x 2,38 m
Machine weight: 24,6 t
Pump motor power: 11 kW
Flow: 158 l/min
Max pump pressure: 140 bar
Oil tank capacity: 300 l
Controller: Sigmatek
- Inverter actuators: KEB (Made in Germany)
- PLC control panel: SIGMATEK (Made in Austria)
- 15" color touch-screen monitor
- Internal memory 100 molds
- N. 3 USB connections
- EUROMAP 67 robot interface (Optional EUROMAP 18 on P.F)
- Process page
- Password access
- Parallel movements for all actions
- Automatic mold height adjustment
- Adjusting the closing force
- Cycle history
- Alarm history
- Memorization of process data
- Weekly programming for on-off cylinder temperature.
- Screw rotation protection before reaching the set temperature
- PLC view for lubrication activation
- Possibility of hot channel control (max 8 from 40 tons to 120 tons; max 16 from l
150 tons to 230 tons; max 24 from 300 tons; max 40 from 360 tons to 650 tons) – optional
- Possibility of sequential injection control (max. 8)
NR 2 Thermoregulator Tool Temp TT-137N
Operation with water up to 140°C
- heating capacity: 12 kW switchable in steps of 6 k
- temperature controlled by micro-processor, self-optimization
digital display of the set and actual temperature
- continuous flow display, monitoring at minimum flow
- filling, depressurization and evacuation of water from the mold - car
- display of pressure in the system and in the tour
- cooling capacity: 60 kW at 50°C
- pump motor: 1.8 kW
- pressurization regime: max. 5 bar or max. 110 l/min
- vacuum mode: max. 8 m col. water (0.8 bar)
- 12 months warranty from delivery
- weight, without liquid: approx. 120 kg
- dimensions: 870 x 360 x 915 mm, incl. rollers
- protection against dry operation, overheating,
- visual and audible alarm for defects
NR 1 LENZKES mold clamps
- 060-068-20 8 pcs
- 960-2022-51 8 pcs
The buyer will be responsible for disassembling and getting everything ready for shipping.
The potential clients can visit the factory and see the machine that’s in working condition.
Video:show contacts

Price 125.700 Euro + VAT, negotiable, ExWorks Simeria, Romania
Please make an offer.
Irrtum, Anderungen und Zwischenverkauf vorbehalten /
Subject to errors, changes and prior sale /
Ne rezervăm dreptul la greșeli, modificări și vânzare
We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana