Maka MK 7s machining center for wood
Location:dortmund
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Netherlands, Rotterdam
On the Maka
we have retrofitted a 6th axle. A Lehmann bridge exists for this. Optionally
this can be sold with
Machine designation: Machining center 5 axis
Manufacturer: MAKA Systems GmbH
Model: MK 7s
Year of manufacture : 2018
Description
MAKA CNC machining center with 5-axis technology
machine control Siemens SINUMERIK 840D SL
operating unit OP 15 PCU
Weight : approx. 8.000 kg
Technical documents
CAD data and installation plan available
Documentation/drawings and CAD data for rotary table available. Condition: as new
Spindle exchanged 09/2022
Technical specifications
5-axis milling machine (6-axis with rotary table)
Installation/connection data
foundation : reinforced concrete floor
quality EN 206
Load capacity 1500 kg/m2
Workplace lighting : hall lighting 250 - 500 lux required
Ambient temperature : 10 - 35° Celsius
Electrical connection : Operating voltage : 400 V / 50 Hz
Rated power : 19 kW
Rated current : 43 A
Pneumatic connection : Operating pressure : 6 bar
Connection thread : 1⁄2"
supply line : clear width min. 1"
Air quality : drained and cleaned
Compressed air consumption : approx. 800 l/h uncompressed
hydraulic connection : operating pressure : max. 210 bar (3 clamping circuits)
Rectangular frame table to accommodate zero point clamping systems. With chip management
(brush device
guide plates) and conveyor belt
Zero point clamping for customer's fixtures
Workpiece clamping pneumatic/hydraulic
incl. hydraulic unit
Milling unit for 5-axis milling
speed infinitely variable up to 24,000 1/min
Tool holder HSK A63
Torque S1=19 Nm
S6=25 Nm
1 x saw blade pick-up place
Extra saw blade storage place (pick-up) for saw blade up to 450 mm diameter. Attached to the
mounted on the machine wall
1 x 3D touch probe with radio transmission
3D measuring probe for measuring the workpiece position or
tolerance and transfer of the values to the CNC program
with radio signal transmission. Measuring probe
in HSK A63 tool holder for use in the unit by changing from the tool
tool magazine
1 x tool breakage control system
Maximum loading capacity: 500 kg
Rapid traverse
X and Y axis: 60 m/min
Z axis: 45 m/min
A/C axis: 10 000 °/min
Acceleration
X
Y and Z axis: 3 m/sec2
Position accuracy per axis: +-0.1 mm/m
Repeatability per axis: +-0.05 mm/m
Spray system for tool cooling
Turntable tool magazine with 20 depositing places
Machine in sheet metal protection cabin with roof in soundproof version. Automatic safety
Working area
2000 x 1000 x 600 mm (X/Y/Z) with an overall tool length of 160 mm
and a tool diameter of 60 mm
Overall machine dimensions: L x W x H approx. 6.7 x 3 x 3.7 m
Accessories
Additional axis (B) for rotary table adds
pl Lehmann clamping bridge system rotoFIX EA-530
Doors were reinforced
In the tool magazine
the blow-out nozzle for the spindle was set up
Find more here
show contacts
Contact us at
show contacts