Heidenhain iTNC530 HSCI machining centre

This Rambaudi RC 270 Vertical Machining center was manufactured in the year 2014. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit and has 5 axis. The spindle speed is at 24000 rpm and runs with a HSK-A63 tool taper. The machine has operated 38428 power on hours and 23655 cutting hours. It stands out for its movable crossbeam which makes the machining centre suitable for high-speed machining with 5 axes. See photo and video gallery for more impressions. Extract of original tech specs (EN) attached as PDF below.
application type: Milling
Location: Portugal
machine type: Machining centers (vertical)
availability: Immediately
control unit brand: Heidenhain
GINDUMAC ID: PT-MIL-RAM-2014-00002
Spindle speed range: 24000 rpm 1/MIN
Tool taper: HSK-A63
Number of axis: 5
X-AXIS Movement: 2700 mm
Y-AXIS Movement: 2200 mm
Z-AXIS Movement: 1250 mm
X and x1 = 2200 mm // speed: 40 m/1' // longitudinal translation of the crossbeam on 2 columns- Y = 2700 mm // speed: 40 m/1' // transversal translation of the ram holder cross saddle on the crossbeam- Z = 1250 mm // speed: 40 m/1' // vertical translation of th eram on the cross saddle- C continous = 400 (+/- 200 °) // rotation of the head around the ram vertical axis- A continous = 230 ° (+ 120 °
110 °) // rotation of the electrospindle support inside the head fork- Precision of linear machine axes (x
x1
y
z): p = 0. 015 mm / transducer optical line- Precision of polar machine axes (c,a): 15 arc sec - repeatability 10 arc sec / transducer encoder- Torque: c
a continous = 1000 nm // c
a braked = 4000 nm
Numeric control milling centre with movable crossbeam
suitable for high-speed machining with 5 axes- Two lateral columns on which crossbeam runs- A crossbeam that supports the ram holder cross saddle and slide on the columns- A ram that slides vertically inside the cross saddle- A head fixed to the lower part of the ram- A working table in the center of the columns
with the following characteristics: 2500 x 2000 mm // 10000 kg/m2 // 300 mm thickness of cast iron table // 8 t-slots - width 28mm- The machine is equipped with a 2-axis glob 89 g milling head (c and a continous)- Inside of the head forks is housed the spindle with 24000 rpm
hsk-a 63 tool taper