Hermle C600V machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Peiting
Germany, Bühl-Weitenung
Germany, Kaiserslautern
Spindle hours: 7,000 h
Machine design: Modified gantry design
CNC control: Heidenhain iTNC 530 with 15" TFT color screenFlexible contour programming6 GB part program memory0.5 ms block processing timeParallel operation with graphicsThread cutting (rigid tapping; without compensating chuck)Tool life monitoringEthernet interface
Flexible contour programming
6 GB part program memory
0.5 ms block processing time
Parallel operation with graphics
Thread cutting (rigid tapping; without compensating chuck)
Tool life monitoring
Ethernet interface
Feed drivesFeed force: 6,000 NRapid traverse: 35 m/minAcceleration: 5 m/s²Feed screw diameter/pitch (X/Y/Z): 40 / 20 mm
Feed force: 6,000 N
Rapid traverse: 35 m/min
Acceleration: 5 m/s²
Feed screw diameter/pitch (X/Y/Z): 40 / 20 mm
Measuring system: Direct scales, resolution 0.0001 mm
Position tolerance (Tp, VDI/DGQ 3441): 0.008 mm (X/Y/Z)
Main spindleTorque (100% / 40% ED): 87 / 130 NmTaper: SK40 (similar DIN 2079), for tool holders per DIN 69871 A
Torque (100% / 40% ED): 87 / 130 Nm
Taper: SK40 (similar DIN 2079), for tool holders per DIN 69871 A
Rigid clamping tableTable surface: 800 x 465 mmMax load: 1,000 kgT-slots: 7 slots, size 14 mm H12, spacing 63 mmGuide slot (4th from rear): 14 mm H7
Table surface: 800 x 465 mm
Max load: 1,000 kg
T-slots: 7 slots, size 14 mm H12, spacing 63 mm
Guide slot (4th from rear): 14 mm H7
Tool changerMagazine positions: 30Max tool diameter: 80 mm (125 mm with free adjacent positions)Max tool length: 250 mmMax magazine load: 120 kgChip-to-chip (VDI 2852): 5.5 s
Magazine positions: 30
Max tool diameter: 80 mm (125 mm with free adjacent positions)
Max tool length: 250 mm
Max magazine load: 120 kg
Chip-to-chip (VDI 2852): 5.5 s
Coolant systemExtendable chip box and accessible chip screenTank: 200 LFlow rate: 40 L/min at 3 bar
Extendable chip box and accessible chip screen
Tank: 200 L
Flow rate: 40 L/min at 3 bar
UtilitiesConnected load: 400 V / 50 HzPower consumption: 22 / 35 kVACompressed air: 6 bar
Connected load: 400 V / 50 Hz
Power consumption: 22 / 35 kVA
Compressed air: 6 bar
Other featuresElectrical thermal expansion compensation
Electrical thermal expansion compensation
Additional equipment
Electronic hand control module (handwheel)
SK40 measuring probe system
Blow-off device
Chip flushing gun
application type: Milling
Location: Germany
machine type: Vertical Machining Centre
Table Load: 1000 kg
Number of Axes: 3
Max. Tool Weight: 6 kg
Spindle Power: 15 kW
Taper Size: SK 40