MICROMILL M 800 Microcut machining centre













If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts

y-travel 500 mm
z-travel 500 mm
Control Siemens 828D
total power requirement 25 kVA
weight of the machine ca. 6,25 t
dimensions of the machine ca. 3887 x 2256 x 2917 mm
CNC control: Siemens 828 D
Machine was put into operation in 2022.
Machine with new milling spindle (replaced in December 2024).
New price EUR 91.100,-
Table
-Table size (LxW) 900x520 mm
-Working height (table/floor) 870 mm
-T-slots, number 5 pieces
-T-slots, width 16 mm
-T-slots, distance 80/100 mm
-max. Table load 450 kg
Travel paths
-X-axis 800 mm
-Y-axis 500 mm
-Z-axis 500 mm
Spindle
-Mounting DIN 69871 40 ISO
-Spindle speeds 10000 rpm
-Spindle motor 10.5/15.8 kW
-Spindle torque 50.0/75.4 Nm
-Distance spindle nose/table 100-600 mm
Feed rates
-X-axis 10 m/min
-Y-axis 10 m/min
-Z-axis 10 m/min
-Rapid traverse X-axis 30 m/min
-Rapid traverse Y-axis 30 m/min
-Rapid traverse Z-axis 30 m/min
Tool changer
-Type Arm type
-Tool stations 30 stations
-Max. tool -0 75/125 mm
-max. tool length 300 mm
-max. tool weight 8kg
Coolant system
-Pump output 155 l/mm
-Tank capacity 496 liters
Chip flushing system
-Pump motor 850 W
-Pump output 130 l/min
-Pump pressure 4 bar
Drive performance
- Main drive motor output 10.5/15.8 kW
- X-axis drive 2.64 kW
- Y-axis drive 2.64 kW
- Z-axis drive 5.4 kW
Connected load 25 kVA
Machine dimensions
-Length without chip conveyor 2652 mm
-Length with chip conveyor 3887 mm
-Depth/width 2256 mm
-Height 2917 mm
Machine weight 6,250 kg
Equipment:
-CNC control Siemens 828D including ShopMill with 10.4 display
-Portable electronic handwheel
-Cooling through the spindle (IKZ) 20 bar with built-in coolant tank and
cartridge filter system 40 microns
-10,000 rpm belt drive spindle ISO 40
-Precision spindle, dynamically calibrated
-Automatic 30-way tool changer ISO 40 (double arm version)
-Precision ground work table with 5 T-slots, size 16
-C3 precision ball screws, pre-tensioned in all 3 axes
-Servo motor with direct drive for all axes
-INA linear guides (roller guide) in all 3 axes
-Automatic lubrication (oil) of the guides
-Telescopic guide covers for all Axes
-rear 4 bar chip flushing system
-coolant system with integrated coolant tank and 4 cooling nozzles (3x water/1x
air)
-hinge - chip conveyor system with side discharge
-full enclosure with roof and sliding doors with large window areas
-light bar on the roof to display the machine status
-work area lighting
-side opening safety windows for easy machine cleaning
-side, pivoting control panel
-switch cabinet with heat exchanger
-rigid thread cutting without compensating chuck (ragid tapping)
-low voltage circuit
-EMC and safety module
-machine in accordance with CE
-machine documentation / German-electronic
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-Weg 800 mm
y-Weg 500 mm
z-Weg 500 mm
Steuerung Siemens 828D
Gesamtleistungsbedarf 25 kVA
Maschinengewicht ca. 6,25 t
Raumbedarf ca. 3887 x 2256 x 2917 mm
Zusatzinformationen
Maschine wurde 2022 in Betrieb genommen.
Maschine mit neuer Frässpindel, getauscht im Dezember 2024.
Anschaffungspreis EUR 91.100,-
CNC Bahnsteuerung: Siemens 828 D
Tisch
-Tischgröße(LxB) 900x520 mm
-Arbeitshöhe(Tisch/Boden)870 mm
-T-Nuten, Anzahl 5 Stück
-T-Nuten, Breite 16 mm
-T-Nuten, Abstand 80/100 mm
-max. Tischbelastung 450 kg
Verfahrwege
-X-Achse 800 mm
-Y-Achse 500 mm
-Z-Achse 500 mm
Spindel
-Aufnahme DIN 69871 40 ISO
-Spindeldrehzahlen 10000 U/min
-Spindelmotor 10,5/15,8 kW
-Spindeldrehmoment 50,0/75,4 Nm
-Abstand Spindelnase/Tisch 100-600 mm
Vorschübe
-X-Achse 10 m/min
-Y-Achse 10 m/min
-Z-Achse 10 m/min
-Eilgang X-Achse 30 m/min
-Eilgang Y-Achse 30 m/min
-Eilgang Z-Achse 30 m/min
Werkzeugwechsler
-Typ Arm-Typ
-Werkzeugstationen 30 Stationen
-max.Werkzeug -0 75/125 mm
-max.Werkzeuglänge 300 mm
-max Werkzeuggewicht 8kg
Kühlmittelsystem
-Pumpenleistung 155 l/mm
-Tankinhalt 496 Liter