Emco E45 metal lathe and milling machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Gräfelfing
Germany, Kaiserslautern
Location: AT
Spindle Power: 13 kW
Connection: KK5 (DIN 55026)
Bar capacity: 45 mm
Drive power: 13 kW
Speed range: 0–6300 rpm
Driven tools: max. 4 kW / max. 16 Nm
Driven tools speed: 0–5000 rpm
Max. clamping force: 6000 N
Morse taper: MK4
Max. speed: 6300 rpm
Machine packaging: pallet + roll-up cover
Bar length: 850–1200 mm
Bar diameter: Ø 8–95 mm
Max. feed rate: 60 m/min
Bar change: approx. 3 s
Magazine change: approx. 15 s
Material support area: 550 × 1210 mm
Material capacity: 10 × Ø 55 mm
Operating side: right
Power supply: 240 V DC/DC
Air supply: 6 bar
Dimensions: 1700 × 1250 × 1090–1380 mm
Safety device: CE
Discharge height: 1200 mm
Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)
Max. part length: 120 mm
Max. diameter: 45 mm (51 mm)
Max. weight: 2 kg
net weight: approx. 500 kg
C-axis on main spindle
Tool turret
12-position VDI30 axial
Directional logic for up to 6 driven tools
Tailstock
Programmable
hydraulically actuated
Hollow clamping cylinder incl. draw tube
Control & software
SINUMERIK 828D OPERATE
SHOPTURN dialog programming
USB interface
Network / Ethernet
10.4" TFT color monitor
3D simulation
Media & machine features
Machine light
Coolant system incl. pump (3.5 bar)
Hydraulic unit
Chip conveyor interface
CE certificate
Documentation
Tool measurement (E45)
Measuring arm fixed in the work area
Tool measurement on the turret
Short setup times / precise measurement / cost-efficient
Workpiece clamping
3-jaw chuck KK5
Soft + hard jaws
Other (machine-related)
Water gun
Air to spindle
Oil/coolant separator
Automatic coolant monitoring
Electronic handwheel
Tool change guard
Hydraulic connections
Pneumatic connections
Additional equipment
Bar feeder / magazine (SL1200 – as referenced)
High-speed function
Documentation
Spindle extension (for bar feeder use)
E45 / MT45 / HT45 → DM45
For 45 mm spindle
Short bars up to 1100 mm
With reducing sleeves (3 pieces)
Required for use with SL1200
Chip conveyor
Hinged belt conveyor
High-pressure coolant unit
14 bar / 50 Hz
Additional high-pressure pump
For tools with internal coolant
Interface & software
Robot interface
PROFI-NET interface
24 V signals
Safety release
Automatic/manual operation switching
Additional components
PC keyboard USB (QWERTY)
Installation & mounting hardware
4× vibration absorbers
4× mounting brackets
4× heavy-duty anchors
Parts collection device
Pneumatically operated
Collection box / conveyor belt