New ZMM C 10 T.10 metal lathe
≈ NGN 189,600,000
Wiener Neudorf7146 km to "United States/Ashburn"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+43 2236 6...
Show
+43 2236 638700
+43 2236 ...
Show
+43 2236 63662
Austria 
Austria, Wiener Neudorf
ca. 4 Monate ab Auftragse
Bulgarien
102960 €
2048.9 €
800 mm
2000 mm
400 mm
260 mm
560 mm
560 mm
318 M
12
8 - 400 1/min
152
0.039 - 15 mm/U
0.02 - 7.5 mm/U
76
0.5 - 150 mm
60 - 1/5 Gänge/"
0.125 - 37.5
240 - 4/5
410 mm
150 mm
105 mm
6 MK
225 mm
11 kW
6000 kg
Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.
Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.
The clamping of the pipes with two universals and stands allows the processing of long pipes.
These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.
Drive via gearbox
Electrodynamic brake
3-axis digital display Fagor
Quick-change tool holder Amestra type C, system like Multifix including 4 holders (3x rectangular, 1 round)
2 pcs. 3-jaw chuck Bison 3295 Dm. 500 mm on both sides of the spindle,
gripping range 120-350 mm. Option: hard top jaws with gripping range 120-500 mm
2 pcs. steady rests on supports Dm. 60 - 260 mm with rollers
Rapid traverses (4)
Longitudinal stop for one position
Taper turning device
Coolant device
Full length rear splash guard
Lead and feed spindle cover
Lathe chuck protection
Tool holder protection
Leveling bolts and plates
Tailstock
Reducing sleeve for the tailstock sleeve
Mechanical movement of the tailstock with handwheel
Low voltage machine light
Operating instructions
Equipment according to +quot;CE+quot; regulations
Further models with spindle bore from 155 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lieferzeit ca. 4 Monate ab Auftragse
Ursprungsland Bulgarien
Preis 102960 ?
Leasingrate 2048.9 ?
Spitzenweite 2000 mm
Spindelbohrung 260 mm
Bettbreite 560 mm
Spindelkegel 318 M
Drehzahlstufen 12
Spindeldrehzahl 8 - 400 1/min
Vorschubanzahl 152
Quervorschub 0.02 - 7.5 mm/U
Gewindeanzahl 76
Gewinde metrisch Bereich 0.5 - 150 mm
Gewinde Modul Bereich 0.125 - 37.5
Gewinde DP Bereich 240 - 4/5
Verstellbereich Querschlitten 410 mm
Verstellbereich Oberschlitten 150 mm
Reitstock Pinolendurchmesser 105 mm
Reitstock Aufnahme 6 MK
Reitstock Pinolenweg 225 mm
Motorleistung 11 kW
Gewicht 6000 kg