Stama MC 734M metal milling machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Peiting
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: FANUC
Control Model: 16i-MB
Through-spindle Coolant: yes
Interference Radius: 252 mm
Connected Load: 51 kVA
Total Power Requirement: 46 kW
Connection Voltage: 400 V3 50 Hz
Nominal Current: 75 A
Additional Fuse: 3x 80 A
Min Cross Section Connection: 4x25 mm²
Spindle Taper: Capto 6
Spindle Bearing Diameter: 85 mm
Max Spindle Torque: 142 Nm (S6/20%)
Tool Magazine Capacity: 48 + 90 tools
Tool Clamping Force: 8,000 N
Feed Rate X / Y / Z: 1 - 10,000 mm/min
Rapid Traverse X / Y / Z: 60 m/min
Max Feed Force X / Y: 7,000 N
Max Feed Force Z: 8,000 N
Max Milling Capacity: 600 cm³
Max Drilling Diameter: 40 mm
Max Tapping Diameter: M30
Main Spindle Motor 1: Kessler DMQ
X-Axis Motor: Fanuc A 06 B-0269-B 100 (5.5 kW, 3,000 rpm)
Y-Axis Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
Z-Axis Motor: Fanuc A 06 B-0273-B 400 (5.5 kW, 3,000 rpm)
Tool Magazine Motor: Fanuc A 06 B-0235-B 000 (2.5 kW, 4,000 rpm)
4th Axis B Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
5th Axis C Motor: Fanuc A 06 B-0236-B 100 (2.3 kW, 4,000 rpm)
8th Axis X2 Motor: Fanuc A 06 B-0266-B 100 (4.5 kW, 3,000 rpm)
7th Axis U Motor: Fanuc A 06 B-0213-B 400 (0.75 kW, 4,000 rpm)
V-Axis Motor: Fanuc A 06 B-0216-B 400 (1.0 kW, 4,000 rpm)
Supplementary Magazine Motor: Fanuc A 06 B-216-B 400 (1.0 kW, 4,000 rpm)
Flat Magazine Motor: Fanuc A 06 B-0235-B 100 (2.5 kW, 4,000 rpm)
Coolant Pump 1: Brinkmann BFS 238/70 (5.0 kW, 2,900 rpm)
Coolant Pump 2: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
Dirty Water Pump: Brinkmann TAS 603/280-6156 (5.5 kW, 2,900 rpm)
Wash Gun Pump: Brinkmann TH 90/470-540 (3.3 kW, 2,900 rpm)
Self-cleaning Lamella Filter Motor: Motovario P 63 B 4 (0.18 kW, 1,360 rpm)
Chip Conveyor Motor: Bauer BS 06-74V/D 05 LA4/SP (0.25 kW, 1,350 rpm)
Hydraulic Unit Motor: Rexroth UPE5-4.00A10V5010ANT-H-1-025 (4.0 kW, 1,390 rpm)
Cabin Extraction Motor: Ziehl-Abegg RH 31 M-20K.5H.2R (0.75 kW, 2,880 rpm)
Conveyor Belt Motor: SEW-Eurodrive R 47 DT 7104/AS B1 (290 Nm, 1,380 rpm)
112.AM
4.AFS/F (22.0 kW
12,000 rpm)
Included Equipment
Chip conveyor
auxiliary magazine
coolant system
workpiece loader