Schuler GMO 2-315-2000-160 stamping press
Gallen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+41 71 948 ...
Show
+41 71 948 70 67
Switzerland 
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Switzerland, Gallen
Germany, Kaiserslautern
Switzerland, Brugg
Netherlands, Rotterdam
Germany, Location:dortmund
Germany, Wiefelstede
Straightener KOHLER KRM 50.400/9
KOHLER Loop control BÜ5
Roll feed KOHLER WVE 120/400
HIESSL belt lubrication (wide spray)
UNIDOR control system
Tool loading consoles
Press Design
drive system: knuckle-joint
frame design: H-frame, monoblock
openings in uprights: yes
number of suspensions: 2
feedstock transport direction: left to right
Press forces
total force (nominal): 315 to
nominal work capacity: 38 kNm
Press Table
table surface (left-right): 2000 mm
table surface (front-back): 1200 mm
thickness of bolster plate: 200 mm
Slide
slide force: 315 to
table surface (left-right): 1995 mm
table surface (front-back): 1100 mm
stroke: 160 mm
stroke rate (max.): 80 /min
slide (mechan. Press)
slide adjustment: 140 mm
stroke rate (min.): 20 /min
stroke rate (max.): 80 /min
main drive power: 90 kW
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 555 mm
distance between columns (H-frame): 2060 mm
passline opening (free passage in side columns): 1060 mm
Overall Specifications (coil lines)
sheet width max.: 400 mm
sheet thickness max.: 5 mm
Coil Chair
coil weight max.: 4 to
Decoiler
design: single reel, traversable
sheet width max.: 400 mm
sheet width (min): 30 mm
coil weight max.: 4 to
max. diameter of coil: 1500 mm
mandrel expansion range from: 460 mm
mandrel expansion range up to: 530 mm
movement: 1500 mm
Leveller Unit
sheet width max.: 400 mm
sheet width (min): 50 mm
material cross section max. (450 N/mm2): 1000 mm²
number of leveller rolls: 9
diameter of leveller rolls: 50 mm
number of infeed-/outfeed rolls: 150
feed velocity min.: 5 m/min
feed velocity max.: 50 m/min
Strip-Feeder
feeder type: roll feeder
sheet width max.: 400 mm
sheet thickness max.: 5 mm
Electrical specifications
mains voltage: 400 V
mains frequency: 50 Hz
Dimensions / weights
total weight approx.: 45000 kg
Attachments (presses)
decoiler: yes
leveller unit: yes
strip feeder: yes