New MAN TGS 41.440 GSR WECHSELSYSTEM DREISEITEN KIPPER concrete mixer truck
≈ US$220,500
Kielce7498 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 602 33...
Show
+48 602 338 032
+48 668 38...
Show
+48 668 382 658
+48 606 84...
Show
+48 606 849 207
+48 795 10...
Show
+48 795 100 231
Poland 
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Kielce
Poland, Aleksandrów Kujawski
Poland, Jelna 72
Poland, Kielce
Poland, Kielce
Concrete mixer truck parts
euro: Euro 6e
MAN TGS 41.440 GSR 8X4
Motorleistung und -typ: D2676 LFAZ Euro VIe
Getriebetyp: Automatik
Zulässiges Gesamtgewicht: 34 T
Ausrüstung
Multifunktionslenkrad
Betonmischer
Planetengetriebe HSM7
Bosch-Rexroth Hydraulikmotor und Hydraulikpumpe
Gerade oder profilierte Stringer (6mm S355)
Mischer mit einem Fassungsvermögen von 10 m3 aus S355-Stahl
Druckwassertank mit einem Fassungsvermögen von 500l. Aluminium
Wasseranschluss auf beiden Seiten
Trichter mit Reibplatte
Rutsche mit Friktionsplatte
Verzinkte Ablaufrinne
Einstellknopf für die Dachrinne
Zwei PVC Verlängerungsrinnen mit Griffen zur Montage an den Kotflügeln
Gummi an den Stringern
Leiter
Lampe an der Leiter
24-V-Elektroinstallation
Steuerung des Betonmischers
die Drehrichtung des Mischers (mechanisches System)
Motordrehzahl (Elektrik)
Konturverleimung nach ECE104-Richtlinie
Kipper
L - Gesamtlänge ca. 6.000 mm
B - Gesamtbreite ca. 2 500 mm
H - Seitenhöhe 1.100 mm
V - Volumen ca. 15,3 m3
6 mm HARDOX 450 Stahlboden
4 mm STRENX 700 Stahl-Klappseiten
rechte Seite mit oberen Scharnieren
unten angeschlagen
linke hydraulische Seite
sogenanntes HYDROBOARD – 3 Zylinder
5 mm Heckseite mit oberen Scharnieren
öffnet automatisch beim Anheben der Box
Vorderseite mit kleinem Dach
SNEEP-Heckablage
ebenerdig
KONTAKT AUF DEUTSCH UND ENGLISCH
show contacts
show contacts
show contacts
LKW Platz: SCIEGIENNEGO STR. 236
25-116 Kielce
MAN TGS 41.440 8X4
Engine power and type: D2676 LFAZ Euro VIe
Transmission type: automatic
Permissible total weight: 34 tons
Equipment
Multifunctional steering wheel
400 l fuel tank
Concrete mixer
HSM7 planetary gear unit
Bosch-Rexroth hydraulic motor and hydraulic pump
Straight or profiled stringers (6mm S355)
Mixer with a capacity of 10 m3 made of S355 steel
Pressurized water tank with a capacity of 500l. aluminum
Water connection on both sides
Funnel with friction plate
Slide with friction plate
Galvanized drainage channel
Adjustment button for the gutter
Two PVC extension channels with handles for mounting on the fenders
Rubber on the stringers
Ladder
Lamp on the ladder
24 V electrical installation
Control of the concrete mixer
the direction of rotation of the mixer (mechanical system)
engine speed (electrics)
Contour gluing according to ECE104 guideline
Tipper
L - width internal approx. 6 000 mm
B - width external approx 2 500 mm
H - height approx. 1 100 mm
V - volume approx. 15,3 m3
6 mm HARDOX 450 steel floor
4 mm bent sides
STRENX 700 steel
right side with upper hinges tilting downwards
left side hydraulic
the so-called HYDROBOARD- 3 actuators
5mm rear side with upper hinges that opens automatically when lifting the box
front side with a small roof
the SNEEP rear shelf was flush with the floor
CONTACT IN GERMAN AND ENGLISH
show contacts
show contacts
show contacts
Truck place: SCIEGIENNEGO STR. 236
25-116 Kielce