New Małek Agregaty M-6 MAX 230V , Verputzmaschine M-6 MAX 230V plastering machine
≈ €4,653
Węgrzce
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 883 08...
Show
+48 883 088 443
+48 603 08...
Show
+48 603 088 447
+48 502 40...
Show
+48 502 402 937
Poland 
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Belchatów
Poland, Węgrzce
Poland, Bytonia
Poland, Bytonia
Poland, Bytonia
Poland, Bytonia
show contacts
Plastering unit for facade plasters M-6 Max + 2 piston compressor 2.2 kW 370L / min FOR FREE !!!
The Małek company produces plaster aggregates, offering efficient, durable and high-quality devices. Our offer includes the M-6 MAX plaster aggregate used for applying plaster and other materials. This machine is appreciated by professional construction teams. Below we present the most important information.
The M-6 MAX facade plastering unit is designed for spraying mortars and adhesives with a grain size of up to 4 mm (adapted for mechanical application according to manufacturers' recommendations), such as:
gypsum and acrylic putties,
adhesives for polystyrene,
facade plasters,
acoustic plasters,
thin-layer plasters,
renovation plasters,
grouting mortars,
injection mortars,
bituminous masses,
primers
dispersion and emulsion paints.
Importantly, thanks to the smooth rotary control, it can pump at a speed of 0 to 20l / min and a pressure of up to 30 BAR (depending on the type of pump).
Plaster aggregate M-6 MAX specification:
pumping rate 0-20l / min,
delivery pressure 30 bar (depending on the type of pump),
pumping distance max 25 m,
pumping height max 15 m,
pump drive 230V, 2.2 kw,
hopper capacity 75 l,
weight 90 kg,
filling height 630 mm,
dimensions: length / width / height 125/50/63 cm (84 cm box),
pump yoke camlock output DN 25 Mon 50 with 0-60 bar manometer
max grain size 4 mm.
Equipment:
material hose DN 25 40 BAR (shod) Camlock GEKA pressure 10 m,
3/8 "air hose 1 x 12.5 mb,
control cable 13 mb,
pump yoke with 0-60 BAR pressure gauge,
gun with electric control for facade plasters, putties and adhesives (nozzle diameter 4.5 mm, nozzle diameter 6 mm, nozzle diameter 8 mm, flat nozzle),
cleaner,
stator D6-3,
rotor D6-3,
rotor wrench,
a set of cleaning balls,
3x2.5 230V power cord (230V plug),
compressor 2.2 kW 370 L / min,
tool box,
air pressure regulator,
user manual in Polish.
CHOOSING THE M-6 MAX PLASTERING UNIT FOR FACADE, YOU RECEIVE A 2-PISTON COMPRESSOR 2.2 KW 370 L / MIN FOR FREE !!! WE ENCOURAGE YOU TO USE A SPECIAL OFFER.
Why is it worth choosing the M-6 MAX plaster aggregate?
This device was manufactured by a Polish manufacturer, using high-quality materials and using years of acquired professional and technical knowledge. M-6 MAX plaster aggregates were created from the combination of the skills of our specialists with professional knowledge, which guaranteed the creation of a fully professional device. In the company, we perfectly understand the specifics of the construction industry and the requirements of equipment users, therefore we create solutions that are directly tailored to the growing needs.
The M-6 MAX plaster aggregate is light and capacious, it will work in large enterprises and smaller construction companies.
We also offer other plastering units, intended for the administration of dry masonry mortars with a grain size of up to 3 mm. The exact specifications can be found in the tabs for specific products. In our store you will also find construction elements and spare parts for aggregates, as well as other devices, tools, parts dedicated to the construction industry.
It is almost impossible to perform any construction works without professional equipment. Moreover, it is the class of equipment that, to a certain extent, determines the effectiveness and efficiency of work. You certainly don't like being surprised by breakdowns that destroy your work schedule. We don't like it either! That is why we create durable and stable solutions, and the M-6 MAX plastering aggregate is the best proof of this.
Equipment:
material hose DN 25 40 BAR (shod) Camlock GEKA pressure 10 m
3/8 "air hose 1 x 12.5 mb
control cable 13 meters
pump yoke with 0-60 BAR pressure gauge
gun with electric control for facade plasters, putties and adhesives (nozzle diameter 4.5 mm, nozzle diameter 6 mm, nozzle diameter 8 mm, flat nozzle)
cleaner
stator D6-3
rotor D6-3
rotor wrench
a set of cleaning balls
3x2.5 230V power cord (230V plug)
compressor 2,2 kW 370 L / min
tool box
air pressure regulator
user manual in Polish
+ 2-piston compressor 2.2 kW 370 L / min
FREE !!!